 |
 |
Type : G96PM Acceleration voltage : 120kV Power : Max. 9.6 kW |
| Capacity Sheet formed item : 1950Lx950W Perforation diameter : D0.1 - D1.0 Board Thickness : 0.1 - 8.0 |
. |
|
Acceleration voltage : 120 (150)kV Power : Max.12kV |
 |
| . |
Sheet formed item : 1950Lx540W Perforation diameter : D0.1 - D1.0 Max.490(Max.50kg) Board Thickness : 0.1 - 8.0 |
Structure of Electron Beam
Perforation
Electron Beam Perforation is constituted of
electron beam generator, lower column,
chamber processing, vacuum unit, CNC
apparatus and high-voltage generator.
In addition to above, incidental
equipment including tumbling barrel
and 5-axis manipulator are used for
retaining processed materials and as mobile jig.
Perforation
Process
First, extract thermal electron generated from
heated cathode (W filum)
from grid and accelerate it on anode. Accelerated
electron shall be converged in magnetic coil
and be conducted to vacuum
chamber. Electron beam of dense high energy
shall irradiate on microscopic
spot which melts partially material
and a perforation is made as a result
after evaporation.
|
|
Diagonal Perforation (Max. 20 degrees) |
Taper Perforation | Slot Perforation |
 |
 |
 |
 |
| Perforation Diameter : D0.1 to 1.0 (mm) Board Thickness : Max. 8.0 (mm) |
W : 0.1 to 0.3 (mm) L : Max. 5.0 (mm) T : Max. 1.0 (mm) | ||
Perforation Samples
 |
 |
|
| Perforation Diameter : D0.5 Perforation Pitch : 1.2 Material : SUS304 Board Thickness : 3.0t Perforation Layout : 45 Hound's tooth check |
Perforation Diameter : D0.1 Perforation Pitch : 0.3 Material : SUS304 Board Thickness : 0.5t Perforation Layout : 60deg Hound's tooth check |
Perforation Diameter : Slot perforation D0.1x3.5L Perforation Pitch : 4.2/1.0 Material : SUS304-CSP Board Thickness : 0.5t Perforation Layout : Hound's tooth check |
If you have any question
concerning electron beam contact ;
E-mail : info@psc-cast.co.jp
Inquiry by
telephone or fax,
Telephone number : +81 255 43 09 13
Facsimile number :
+81 255 43 79 27